Products

UUK-4RD/LED60 4mm Feed Through-Fuse Screw Type Din Rail Terminals Block Contact

Short Description:

The screw-type industrial terminal block has strong static connection stability, high versatility, and can be quickly installed on U-shaped guide rails and G-shaped guide rails. Abundant and practical accessories. Traditional and reliable.

Wiring method: screw connection.

Rated wiring capacity: 4 mm2

Installation method: NS 35/7.5,NS 35/15, NS32.


Technical Data

Product Tags

Advantage

Industrial Distribution Terminal Blocks Screw type
Closed bolt leading hole will not only facilitate operation of screwdrivers, also prevent the bolt from dropping out;
Electric potential distribution is realized by either connecting central adaptor to the center of terminal or inserting a side adaptor to the cone jack;

General auxiliaries,such as end plate,segment spacer, and spacer, are attached for terminal with multiple sections;
The insulating shell is made if imported engineering plastic polyamides(Nylon)66,which is of high mechanical intensity, good electrical conductivity, and super flexibility;

Two ends on the top with white marking system to realize uniformed sign.

•  Good workmanship
•  Stable performance
•  Easy to install
•  Segment test terminal latest structure
•  Rich accessories to meet the needs of different occasions

PRODUCT DETAIL DATA
Product properties UUK-4RD/LED60
Wiring Diagram  A
Product Classification Cantilever fuse terminal for 5 x 20 mm type G fuse, with LED, for 60 V AC/DC
Product Type Screw Type Terminal Block
Product Series UUK
Connect Number 2
Industry Power Industry
Factory engineering
process control
Mechanical Engineering
Railway industry
Potential 1
Wiring data UUK-4RD/LED60
Strip Length 9
AWG 24  ~  10
Rigid conductor cross section 0.2 mm²  ~ 6 mm²
Flexible conductor cross section 0.2 mm²  ~ 6 mm²
Minimum wiring capacity of single wire 0.2
Maximum wiring capacity of single strand wire 6
Minimum wiring capacity of multi-strand wires 0.2
Maximum wiring capacity of multi-strand wires 6
Incoming line direction Side Cable Entry
Width(mm) 6.2
Height(mm) 57.8
Deep (mm) 75.6
NS 35/7.5 75.6
NS35/15 83.1
IEC parameters UUK-4RD/LED60
Rated impulse withstand voltage 6kV
Rated voltage 60
Rated current 6.3
UL parameters UUK-4RD/LED60
Rated voltage  
Rated current
Material specifications UUK-4RD/LED60
Color Block
Flammability rating V0
Pollution level 3
Insulation material group I
Insulation Materials PA66
Standards and Norms UUK-4RD/LED60
Connections comply with standards IEC 60947-7-3
GB14048.7.3

  • Previous:
  • Next: