Industrial Distribution Terminal Blocks Screw type
Closed bolt leading hole will not only facilitate operation of screwdrivers, also prevent the bolt from dropping out;
Electric potential distribution is realized by either connecting central adaptor to the center of terminal or inserting a side adaptor to the cone jack;
General auxiliaries,such as end plate,segment spacer, and spacer, are attached for terminal with multiple sections;
The insulating shell is made if imported engineering plastic polyamides(Nylon)66,which is of high mechanical intensity, good electrical conductivity, and super flexibility;
Two ends on the top with white marking system to realize uniformed sign.
• Good workmanship
• Stable performance
• Easy to install
• Segment test terminal latest structure
• Rich accessories to meet the needs of different occasions
Wiring data | UUK-6-GY | UUK-6PE |
Strip Length | 10 | 10 |
AWG | 24 ~ 8 | 24 ~ 8 |
Rigid conductor cross section | 0.2 mm² ~ 10 mm² | 0.2 mm² ~ 10 mm² |
Flexible conductor cross section | 0.2 mm² ~ 10 mm² | 0.2 mm² ~ 10 mm² |
Minimum wiring capacity of single wire | 0.2 | 0.2 |
Maximum wiring capacity of single strand wire | 10 | 10 |
Minimum wiring capacity of multi-strand wires | 0.2 | 0.2 |
Maximum wiring capacity of multi-strand wires | 10 | 10 |
Incoming line direction | Side Cable Entry | Side Cable Entry |
Width(mm) | 8.2 | 8.2 |
Height(mm) | 47.7 | 47.7 |
Deep (mm) | 46.9 | 46.9 |
NS 35/7.5 | 47.5 | 47.5 |
NS35/15 | 55 | 55 |
IEC parameters | UUK-6-GY | UUK-6PE |
Rated impulse withstand voltage | 8kV | 8kV |
Rated voltage | 1000 | |
Rated current | 41 |
UL parameters | UUK-6-GY | UUK-6PE |
Rated voltage | ||
Rated current |
Material specifications | UUK-6-GY | UUK-6PE |
Color | Grey | Yellow & Green |
Flammability rating | V0 | V0 |
Pollution level | 3 | 3 |
Insulation material group | I | I |
Insulation Materials | PA66 | PA66 |
Standards and Norms | UUK-6-GY | UUK-6PE |
Connections comply with standards | IEC 60947-7-1 GB14048.7.1 |
IEC 60947-7-2 GB14048.7.2 |